hi all,
having a thinning out of the collection and this is the first to go up for grabs!
Brice 6 string lefty
Alder body
Maple neck
24 frets
Spalted finish
6 bolt neck joint
EMG CS and EMG DC pickups on an 18v system
Brass nut
Lightweight tuners
Dual truss rods
Black hardware
Points to be aware of:
Rear battery cover missing (i fix this with some electrical tape)
Needs new strings - the ones on it are fairly old and pretty dull sounding now
Could do with a set up and a little truss rod adjustment
2 control knobs are missing - when i retrofitted the emg pickups, one of the came with solid shaft pots and the other with knurled shafts. the solid shaft pots wouldn't fit the existing knobs, so i could only use 2 of them. never bothered me much but you can pick up knobs for these shafts pretty cheap online
This is quite a bass, and a lot for the money. The Brice brand is part of the Rondo/SX family which i'm sure most would be familiar with. Really great budget brand that cater for lefties, great platform for mods, some of which i have done! It is quite rare to find a budget extended range lefty bass at this price with this kind of hardware... This bass used to retail at $329 when new (discontinued now, but there is an identical Brice with a flamed maple finish on their site here: http://www.rondomusic.com/hxb406natflamelh.html
Price:£180
Postage at cost
Happy to answer any questions!
Cheers!
| Attachments: |
|
brice 4.jpg [ 65.69 KiB | Viewed 9121 times ] |
|
brice 3.jpg [ 55.79 KiB | Viewed 9121 times ] |
|
brice 2.jpg [ 65.05 KiB | Viewed 9121 times ] |
|
brice 1.jpg [ 459.02 KiB | Viewed 9125 times ] |