Moved.
| LeftyBassist.com http://leftybassist.com/ |
|
| Staining a body http://leftybassist.com/viewtopic.php?f=15&t=3814 |
Page 1 of 1 |
| Author: | glefty5 [ July 7th, 2012, 1:18 am ] |
| Post subject: | Staining a body |
I'd like some advice on staining my natural Rockbass Corvette into a black stain. I'd appreciate any advice re: sanding/cutting back the current 'finish' & staining/finish coating procedures. My 1st time to try but don't wanna pay a pro as the bass isn't that expensive. Thanks brethren |
|
| Author: | danomite64 [ July 7th, 2012, 4:08 am ] |
| Post subject: | Re: Staining a body |
You probably should ask this in the 'Blueprinting and Bondo' forum. |
|
| Author: | andrew [ July 7th, 2012, 8:46 am ] |
| Post subject: | Re: Staining a body |
Moved.
|
|
| Author: | Rodent [ July 14th, 2012, 12:02 pm ] |
| Post subject: | Re: Staining a body |
a lot will depend on the woods your body is made from. any possibility of adding a few close-up images of the top, back, and sides? all the best, R |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|