LeftyBassist.com

The online home for southpaw bassists.
It is currently March 29th, 2024, 12:14 am




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Detailing a body - cleaning up those micro scratches
PostPosted: April 2nd, 2011, 10:37 am 
Offline
User avatar

Joined: March 10th, 2008, 7:00 pm
Posts: 1184
Location: Seattle, WA USA
I'm sure we've all bought a used bass that was gently cared for, but it still has annoying micro scuffing to the finish. The products I use to buff out a newly finished body will work equally well to clean up that used body. Since few of us have the tools a finishing shop would have, I'll write this from the perspective of working this without power tools


First off, you'll need several clean micro-fiber cloth. I buy these in a bulk pack at Costco, and cut them up into smaller pieces so I don't waste an entire cloth on one working session. I also like to remove the edge stitching so I don't accidentally impart scuffing that's worse than what I started to remove.

Image
http://www.amazon.com/Unitex-Large-Ultr ... B00113SX5O

I use these cloths to apply 3M Perfect-it II onto the body in a small area. I then vigorously buff this area until the compound has been used up. A little experimenting will allow you to disciver how much pressure to apply to get the best results. It's critical you don't get a piece of debris under the cloth (you'll scratch the finish), so be careful around holes in the finish - pickguard mounting screw holes are the worst

Image
http://www.autogeek.net/3mfiniimacpo.html

I use the same application process to then apply 3M's Perfect-it II to remove any remaining swirl marks

Image
http://www.amazon.com/3M-Perfect-Foam-P ... B0009KMHS4

Finally, I'll use a silicone-free Carnuba wax to polish and protect the newly rejuvinated finish

Good luck with your clean-up efforts

all the best,

R

_________________
Moderator: Blueprinting and Bondo
Pickups: Honey Badger Pickups - Like Honey Badger Pickups on Facebook!
Basses: Regenerate Guitar Works - Like Regenerate Guitar Works on Facebook!


Top
 Profile  
Reply with quote  
 Post subject: Re: Detailing a body - cleaning up those micro scratches
PostPosted: April 2nd, 2011, 9:07 pm 
Offline
User avatar

Joined: November 26th, 2008, 6:14 am
Posts: 3619
Location: Oahu, Hawaii
Thanks Rod, does this method work equally as well on a pickguard?

_________________
R&B Stretch Bass, Walter Woods 1000w Green-Light Stereo Amp, AccuGroove El Whappo and TR112, assorted axes, amps, cabs...
http://www.myspace.com/thestrangershawaii


Top
 Profile  
Reply with quote  
 Post subject: Re: Detailing a body - cleaning up those micro scratches
PostPosted: April 3rd, 2011, 8:32 am 
Offline
User avatar

Joined: March 10th, 2008, 7:00 pm
Posts: 1184
Location: Seattle, WA USA
good question ... and one I presently don't have an answer for.

if I knew for certain the pickguard material, and tested on some scrap material that could be left to sit out for 3 -6 months afterwards, I'd probably have an opinion for that specific material. I'd need to do a similar test on other materials to assess how they respond to the ingredients in the polishing compounds


presently I don't make attempts to restore a pickguard, but it's definitely something to look into as opportunity permits

all the best,

R

_________________
Moderator: Blueprinting and Bondo
Pickups: Honey Badger Pickups - Like Honey Badger Pickups on Facebook!
Basses: Regenerate Guitar Works - Like Regenerate Guitar Works on Facebook!


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits