| LeftyBassist.com http://leftybassist.com/ |
|
| ATK 300L http://leftybassist.com/viewtopic.php?f=13&t=9736 |
Page 1 of 1 |
| Author: | jersey bluesdude [ February 6th, 2019, 4:58 pm ] |
| Post subject: | ATK 300L |
https://www.ebay.com/itm/IBANEZ-ATK300L ... Swh5ZcW17A |
|
| Author: | Jeroen [ February 7th, 2019, 1:22 am ] |
| Post subject: | Re: ATK 300L |
Looks like this previously belonged to a lefty who played with the low E at the bottom, looking at the nut. Maybe someone here? Carmine's old ATK? |
|
| Author: | paulo [ February 7th, 2019, 4:24 am ] |
| Post subject: | Re: ATK 300L |
Jeroen wrote: Looks like this previously belonged to a lefty who played with the low E at the bottom, looking at the nut. Maybe someone here? Carmine's old ATK? I've heard the nut on most of these came like that from factory for whatever reason, the one I had also had a nut just like that but who knows?  
|
|
| Author: | Jeroen [ February 7th, 2019, 6:59 am ] |
| Post subject: | Re: ATK 300L |
All three ATK's I owned are Japanese and had a lefty nut. |
|
| Author: | fivebass52 [ February 8th, 2019, 4:14 am ] |
| Post subject: | Re: ATK 300L |
I've owned two 4-strings; 1986 era - most likely Chinese built (the 1st was a righty, the 2nd a lefty); both had nuts appropriate for the bass, and two 5-strings - a 2013 right hander, and my Japanese 1986... both with appropriate nuts. In other words, all of the ATK's I've owned (still have the 5-strings) had nuts that were appropriate for their "hand" designation... This is the first time I've ever seen a universal nut on "any" Ibanez model. Hard to imagine this ATK shipped with that nut from the factory... |
|
| Author: | Carmine [ February 8th, 2019, 3:33 pm ] |
| Post subject: | Re: ATK 300L |
Jeroen wrote: Looks like this previously belonged to a lefty who played with the low E at the bottom, looking at the nut. Maybe someone here? Carmine's old ATK? IIRC I'm pretty sure that is one of the MIK ATK's I used to have... it was New Old Stock, nice bass, beautiful grain and yep that was the original nut from the factory, I never touched it. Played fine strung either way.  
|
|
| Author: | crescenze [ February 8th, 2019, 5:53 pm ] |
| Post subject: | Re: ATK 300L |
Wow! Interesting. |
|
| Author: | bbl [ February 10th, 2019, 6:46 pm ] |
| Post subject: | Re: ATK 300L |
I bought a brand new lefty ATK in the mid-90s that had a nut just like this one. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|