I was wondering if anyone here is looking to sell a CIJ blocks and binding neck (rosewood)
Just the neck itself actually, I have tuning keys that i'd drop in (pre-CBS
)Allparts or Warmoth necks work as well actually.
like that
thanks!
Mike
| LeftyBassist.com http://leftybassist.com/ |
|
| jazz blocks and binding neck http://leftybassist.com/viewtopic.php?f=12&t=615 |
Page 1 of 2 |
| Author: | WestBerliner [ January 28th, 2009, 11:11 am ] |
| Post subject: | jazz blocks and binding neck |
I was wondering if anyone here is looking to sell a CIJ blocks and binding neck (rosewood) Just the neck itself actually, I have tuning keys that i'd drop in (pre-CBS )Allparts or Warmoth necks work as well actually. like that thanks! Mike |
|
| Author: | Rodent [ January 28th, 2009, 7:51 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
you know that most CIJ key utilize a non Fender USA standard hole, right? 1/2" keys (Fender standard 11/16" BML hole) are too big 3/8" keys (GB7 standard 9/16" hole) are too small IIRC the CIJ necks utilize roughly a 5/8" hole. every Frankenbass I've assembled with a CIJ neck required that I either use CIJ keys or I plug/re-drill the tuner holes. YMMV of course all the best, R |
|
| Author: | WestBerliner [ January 28th, 2009, 9:27 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
ha! I did not know that  thanks for the heads up! well then.....with tuners it is  (though i'm quite sure I could get the guy who does my setups to redrill the holes)thanks though! |
|
| Author: | WestBerliner [ January 28th, 2009, 10:04 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
p.s. how hard is this going to be for me to find? does Allparts even make a B+B lefty neck? |
|
| Author: | Rodent [ January 28th, 2009, 11:00 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
there's a guy who posts these as parts on eBay. if I can remember his username I'll post it here for you. he also sell the tuners, and has been my source in the past when I needed them all the best, R |
|
| Author: | WestBerliner [ January 28th, 2009, 11:45 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
that would be great, and i would be very grateful! maybe I can shoot him an email and see if he has any of these necks.
|
|
| Author: | Rodent [ January 29th, 2009, 9:48 am ] |
| Post subject: | Re: jazz blocks and binding neck |
take a look at what these guys are offering reliablefender (more to come as I find them and edit this post) R |
|
| Author: | WestBerliner [ January 29th, 2009, 12:46 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
they don't appear to have anything with blocks. ill have to keep an eye out though. i emailed one japanese seller, but he said he can't sell me just a neck 
|
|
| Author: | ricktim83 [ January 29th, 2009, 9:07 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
not sure how you feel about warmoth necks, but i see quite a few with blocks and binding on their showcase page(right handed of couse) so i know they have the means. i, however have never done business with them, so i dont know how they cater to lefties. worth a shot though. good luck! |
|
| Author: | WestBerliner [ January 29th, 2009, 9:54 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
perhaps i'll shoot them an email and see! thanks!!
|
|
| Author: | WestBerliner [ January 31st, 2009, 4:47 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
anyone here ever deal with Kavanagh Custom? http://www.kavanaghcustoms.co.uk/ they appear to make custom necks, blocks and binding, lefty, for a pretty decent price.  I sent them an email, I'll let you guys know what they say (this may be useful for other lefties in the future) *update* i got a reply back. looks like they aren't accepting any custom orders at this time. 
|
|
| Author: | Basshappi [ February 2nd, 2009, 2:44 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
Warmoth is very good, but expensive. If you can't find one in their "Showcase" then the wait can be rather long, I waited almost 3 months for mine. |
|
| Author: | Rodent [ February 2nd, 2009, 3:21 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
I wish Warmoth used graphite stiffening bars instead of steel ... that steel adds close to a full pound of unneeded weight compared to the composite bars on the positive side - those Warmoth necks have the best B&B details I've seen on any neck to date all the best, R |
|
| Author: | WestBerliner [ February 3rd, 2009, 3:52 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
im not particularly in a hurry.... it does depend on how much they'd want though... |
|
| Author: | fivebass52 [ February 4th, 2009, 5:59 am ] |
| Post subject: | Re: jazz blocks and binding neck |
Keep a look-out at http://www.rondomusic.com/ - at the moment they have only have a 3/4 size neck in the style you want, and other full-size in maple. Look in the Parts/Bodies section.... |
|
| Author: | WestBerliner [ February 6th, 2009, 10:36 am ] |
| Post subject: | Re: jazz blocks and binding neck |
i didn't realize they sold parts! haha thank you! I will definitely keep an eye out
|
|
| Author: | WestBerliner [ February 19th, 2009, 4:02 pm ] |
| Post subject: | Re: jazz blocks and binding neck |
looks like there's one on ebay....but its $400 US....hmmmmmmmmmmmmmmmmm  and i'd have to driill mounting holes in it since it's 70's spec, with 3 bolts. |
|
| Author: | Agent00Soul [ June 18th, 2009, 4:39 pm ] | |||
| Post subject: | Re: jazz blocks and binding neck | |||
I have a Warmoth neck - with block inlay and binding - installed in my USA Fender Jazz. It's a 100% improvement. They even painted the headstock for me to match my body. The Fender decal I had to add myself of course. I can attest that the tuner holes needed no modification whatsoever for the Fender tuners to be installed. That might because the original instrument was Fender USA, not Japan or Mexico. I think it has an extra two frets as well. Here's a tip with Warmoth. Give them a call if you don't see what you want on their site. I waited and waited for a bound/inlaid lefty Jazz neck to appear and finally bit the bullet and called to have them build one for me from scratch (which is more expensive). It turns out they had one laying around that was never put online. So no extra charge aside from the paying for the paintjob on the headstock and installation of the frets. It cost around $350 and took about 3 weeks for delivery. I can't recommend them enough for any kind of workhorse instrument.....
|
||||
| Author: | Rodent [ June 19th, 2009, 11:23 am ] |
| Post subject: | Re: jazz blocks and binding neck |
I found a source to do custom B&B work for me, but it is by no means cheap. my cost for simple block inlays sans binding is roughly $250US plus r/t shipping the guy does incredible inlay work, but I don't see many clients opting for the added cost of B&B anytime soonthis just to confirm the good deal on the W neck if you can find one available all the best, R |
|
| Author: | andrew [ June 19th, 2009, 11:29 am ] |
| Post subject: | Re: jazz blocks and binding neck |
Rodent wrote: I found a source to do custom B&B work for me, but it is by no means cheap. my cost for simple block inlays sans binding is roughly $250US plus r/t shipping the guy does incredible inlay work, but I don't see many clients opting for the added cost of B&B anytime soonthis just to confirm the good deal on the W neck if you can find one available all the best, R Considering B+B is an $800 list price upgrade on a Lakland neck that's a bargain Rod. |
|
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|