LeftyBassist.com
http://leftybassist.com/

Post your pedal board!!!
http://leftybassist.com/viewtopic.php?f=10&t=2527
Page 4 of 4

Author:  andrew [ April 7th, 2018, 11:04 am ]
Post subject:  Re: Post your pedal board!!!

I use different boards in every band I play in so I don't have to lug a giant board to cover the needs of multiple bands. This is the one I put together most recently.
It was actually wired up for me by Revelation Cables, who did a great job.

Attachments:
image1.jpeg
image1.jpeg [ 182.34 KiB | Viewed 856 times ]

Author:  blablas [ April 21st, 2018, 4:17 am ]
Post subject:  Re: Post your pedal board!!!

Done some changes.
Image
Several different pedals (old and new) also a few chain order mutations.

Author:  blablas [ August 1st, 2018, 3:02 pm ]
Post subject:  Re: Post your pedal board!!!

More changes. ;)
Image
A few new pedals, retired some and moved some to other positions on the board.
Also replaced most of the EBS patch cables with the newer version EBS patch cable. Had some problems with bad contact at several positions in the chain a few months ago. Hopefully the new version will behave better, they have gold plated plugs so should be more reliable than the older nickel plated plugs.

Author:  Agent00Soul [ August 1st, 2018, 3:10 pm ]
Post subject:  Re: Post your pedal board!!!

blablas wrote:
More changes. ;)
Image
A few new pedal, retired some and moved some to other positions on the board.
Also replaced most of the EBS patch cables with the newer version EBS patch cable. Had some problems with bad contact at several positions in the chain a few months ago. Hopefully the new version will behave better, they have gold plated plugs so should be more reliable than the older nickel plated plugs.


Do you find things get start getting loose after playing out for a while and needing re-tightening?

Author:  blablas [ August 2nd, 2018, 1:21 am ]
Post subject:  Re: Post your pedal board!!!

What are you exactly asking? I'm not sure how to interpret your question. :)

Author:  Agent00Soul [ August 14th, 2018, 9:20 am ]
Post subject:  Re: Post your pedal board!!!

blablas wrote:
What are you exactly asking? I'm not sure how to interpret your question. :)


No subtext implied :lol:

I found that after about 6 months of hard use, the screws holding my board together were getting really loose and in some cases fell off before I could tighten them (which was hard with the pedals installed). I wrote to the manufacturer and he sent me wing nuts which are much easier to adjust.

Author:  blablas [ August 14th, 2018, 10:49 am ]
Post subject:  Re: Post your pedal board!!!

Now you explained it I understand exactly what you are asking. :)
No issues with nuts or screws working themselves loose, my board is primarily used for fun at home so doesn't get moved about a lot.

It's just a dirt cheap board that I modified a little bit here and there.

Author:  blablas [ September 28th, 2018, 7:01 am ]
Post subject:  Re: Post your pedal board!!!

The ever-changing board! ;)

Reinstated the TC Alter Ego delay - after recently having replaced it by the EQD Ghost Echo on the board, I missed it. To create a open position I removed the TC Mimiq mini which didn't get much use anyway.
Image
Also worked out the order I like with all the delays, revebs and shimmers.
The order is: TC Fluorescence (shimmer), EH Canyon (shimmer), EQD Afterneath, EQD Ghost Echo, Boss DD-7 (reverse mode), TC Alter Ego, Boss RV-6.

Page 4 of 4 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/